
PRODUCT CATEGORY
OUR PRODUCTS
PRODUCT CENTER

TRIS(2-CHLOROPROPYL) PHOSPHATE (TCPP)
P erform ance and A pplication
This product is colorless to pale yellow oily liquid, soluble in benzene, alcohol, ester and carbon tetrachloride. A t 20
℃ ,
its aquatic solubility is 1.6g/L. This product is insoluble in aliphatic hydrocarbons. C hlorine content is 32.5% , and phosphorus
content is 9.5% . A s the m olecule contains both phosphorus and chlorine, its flam e-retardant properties are very significant; at
the sam e tim e, the product is plasticized, m oisture-proof, anti-static and so on. Therefore, it is an additional flam e retardant.
This product is suitable for flam e retardancy of polyurethane, P V C , polystyrene, phenolic resin, acrylic resin, rubber and coating.
It is generally used w ith antim ony oxide to increase the flam e-retardant efficiency of antim ony oxide. The am ount is about 10%
This product is colorless to pale yellow oily liquid, soluble in benzene, alcohol, ester and carbon tetrachloride. A t 20
℃ ,
its aquatic solubility is 1.6g/L. This product is insoluble in aliphatic hydrocarbons. C hlorine content is 32.5% , and phosphorus
content is 9.5% . A s the m olecule contains both phosphorus and chlorine, its flam e-retardant properties are very significant; at
the sam e tim e, the product is plasticized, m oisture-proof, anti-static and so on. Therefore, it is an additional flam e retardant.
This product is suitable for flam e retardancy of polyurethane, P V C , polystyrene, phenolic resin, acrylic resin, rubber and coating.
It is generally used w ith antim ony oxide to increase the flam e-retardant efficiency of antim ony oxide. The am ount is about 10%

Zinc borate
Zinc borate is an inorganic additive flame retardant, which is characterized by good thermal stability, both flame retardant and smoke suppression. It can replace antimony trioxide in some products and can also be used in conjunction with other inorganic flame retardants.

Aluminum hydroxide
Aluminum Hydroxide (also known as: hydrated alumina, abbreviated as: ATH)
Molecular formula: AL(OH)3 or AL2·3H2O Molecular weight: 78
Molecular formula: AL(OH)3 or AL2·3H2O Molecular weight: 78

magnesium hydroxide
Physical properties: Magnesium hydroxide mainly has three specifications of 325 mesh, 1250 mesh, 2500 mesh, and 5000 mesh. Remarks: Surface modification treatment can be carried out according to customer requirements. Special instructions are required when ordering.

Ammonium Polyphosphate
Due to its extremely low water solubility, this product is especially suitable for use as an acid source for intumescent coatings. Intumescent coatings on steel structures can meet the fire protection rating of DIN4102; it can also be used as intumescent coatings on wood or plastic.
Previous page
1
2
Next page
CONTACT US
Address: South of East Extension, Chuangxin Street, High-tech Development Zone, Yucheng City, Shandong Province

Wechat QR code
Copyright : Shandong Chenxu New Material Co., Ltd. 鲁ICP备09047114号 鲁公网安备 37148202000364号 Powerby : 300.cn jinan